PerfectVector
Studio

AI-NATIVE VECTORIZATION

Potrace vs VTracer vs PerfectVector, measured.

Same eight JPEGs, every anchor point counted. VTracer handled color in one pass, Potrace won on black-and-white line art, and PerfectVector wrote at least 93% fewer points than either. Try it on your own image here.

or try by clicking an image

Vectorize and inspect protected previews for free, with no usage limit.

Credits to unlock a finished result: 1. Repeat downloads are free.

THE SHORT VERSION

Potrace or VTracer: which is better?

VTracer is the better free tracer for color: it reads every color in one pass and wrote fewer anchor points than Potrace on six of our eight JPEGs. Potrace is better for black-and-white line art, where it wrote the fewest points and the smallest file of all three tools. Both follow the pixel edge, so JPEG noise becomes extra points, and in VTracer's case hundreds to thousands of extra fill colors. PerfectVector rebuilds the shapes instead: 7,751 anchor points for all eight files, against 117,391 for VTracer and 166,094 for Potrace, and the closest match to the clean artwork on every image.

Anchor points

Lower is better

All eight files added up

  • Potrace166,094
  • VTracer117,391
  • PerfectVector7,75115× fewer

Each multiple is against the next best free tracer, VTracer.

File size

Lower is better

All eight files added up

  • Potrace3.37 MB
  • VTracer3.03 MB
  • PerfectVector258 KB12× smaller

Each multiple is against the next best free tracer, VTracer.

Pixels off

Lower is better

Average share of pixels that miss the clean artwork

  • Potrace7.5%
  • VTracer3.3%
  • PerfectVector0.87%3.8× fewer

Each multiple is against the next best free tracer, VTracer.

Tested See all eight imagesTry it on your own JPEG

EVERY IMAGE, MEASURED

Which tracer leaves the fewest anchor points?

Pick an image and compare the same JPEG in all three files. The paths and points view draws each file's outlines in mint with every anchor point on them: the free tracers bend theirs around every ragged edge the JPEG left behind.

Every file, added up

One card per test image. VTracer wrote fewer points than Potrace on six of the eight images; PerfectVector wrote fewer than both on seven. The exception is the line art, where Potrace is the leanest.

Shorter bar is better. Each card has its own scale; multiples are against the next best free tracer.

  1. Coffee cup icon

    Simple icon

    • Potrace19,340
    • VTracer6,236
    • PerfectVector9864× fewer
  2. Honeycrust Bakery badge

    Badge with lettering

    • Potrace33,004
    • VTracer24,899
    • PerfectVector69836× fewer
  3. Northpeak wordmark

    Logo with text

    • Potrace3,999
    • VTracer2,198
    • PerfectVector16513× fewer
  4. Four weather icons

    Icon set

    • Potrace19,932
    • VTracer11,760
    • PerfectVector22153× fewer
  5. Fox mascot

    Character

    • Potrace19,114
    • VTracer21,196
    • PerfectVector47340× fewer
  6. Lighthouse at sunset

    Flat illustration

    • Potrace7,820
    • VTracer6,160
    • PerfectVector28222× fewer
  7. Windowsill still life

    Detailed illustration

    • Potrace60,064
    • VTracer41,028
    • PerfectVector2,66215× fewer
  8. Lemon branch line art

    Black-and-white line art

    • Potrace2,821
    • VTracer3,914
    • PerfectVector3,152
Show every number as a table
ImagePotrace1.16VTracer1.0.0-alpha.4PerfectVectorproduction engine, 2026-11-17
Coffee cup iconSimple icon19,340anchor points417 KB8 fill colors80.8% pixel match6,236anchor points172 KB831 fill colors98.4% pixel match98anchor points3.7 KB4 fill colors99.7% pixel match
Honeycrust Bakery badgeBadge with lettering33,004anchor points689 KB8 fill colors97.3% pixel match24,899anchor points663 KB2,707 fill colors95.6% pixel match698anchor points20.5 KB4 fill colors99.2% pixel match
Northpeak wordmarkLogo with text3,999anchor points85.8 KB8 fill colors98.4% pixel match2,198anchor points58.3 KB164 fill colors98.4% pixel match165anchor points4.3 KB4 fill colors99.6% pixel match
Four weather iconsIcon set19,932anchor points423 KB8 fill colors97.6% pixel match11,760anchor points313 KB1,131 fill colors96.8% pixel match221anchor points6.5 KB4 fill colors99.7% pixel match
Fox mascotCharacter19,114anchor points392 KB8 fill colors98.0% pixel match21,196anchor points562 KB2,094 fill colors96.5% pixel match473anchor points16.1 KB8 fill colors99.3% pixel match
Lighthouse at sunsetFlat illustration7,820anchor points150 KB8 fill colors90.2% pixel match6,160anchor points161 KB534 fill colors98.3% pixel match282anchor points7.6 KB13 fill colors99.6% pixel match
Windowsill still lifeDetailed illustration60,064anchor points1.20 MB8 fill colors81.2% pixel match41,028anchor points1.04 MB3,320 fill colors95.2% pixel match2,662anchor points83.0 KB26 fill colors98.2% pixel match
Lemon branch line artBlack-and-white line art2,821anchor points65.1 KB1 fill colors96.5% pixel match3,914anchor points111 KB1 fill colors94.1% pixel match3,152anchor points117 KB2 fill colors97.8% pixel match
All eight images (pixel match is the average)166,094anchor points3.37 MB57 fill colors92.5% pixel match117,391anchor points3.03 MB10,782 fill colors96.7% pixel match7,751anchor points258 KB65 fill colors99.1% pixel match

Pixel match is the share of pixels within 32 of 255 levels, in every channel, of the clean artwork before JPEG compression. It shows how much noise each SVG carried over; it is not a judgement of design quality. The sample images were generated for this test with an AI image model.

AT A GLANCE

What is the difference between Potrace, VTracer and PerfectVector?

In short: Potrace traces one color at a time, so tools such as Inkscape run it once per color. VTracer reads every color itself. PerfectVector rebuilds the shapes instead of tracing pixels.

Sources for this comparison

PerfectVector is not affiliated with, endorsed by, or sponsored by the Potrace or VTracer projects. They are named only so readers can compare tracing results.

THE RIGHT TOOL

When is a free tracer the right choice?

Potrace and VTracer are fast, free and run on your own computer. PerfectVector is built for a different job: a file you will open and edit.

METHOD

How was this measured?

One script prepared the inputs and ran both open-source tracers on this date. PerfectVector converted the same files through its public Developer API. Nobody edited any output.

  1. 01

    Make the artwork

    Eight original images were generated with an AI image model: flat icons, a badge and a wordmark with lettering, a mascot, two illustrations and one black-and-white line drawing.

  2. 02

    Damage it the same way

    Each image was resized to 1000 px (the wordmark to 1200 × 292) and saved as a JPEG at quality 45 with 4:2:0 chroma subsampling. All three tools received these exact bytes.

  3. 03

    Run each tool at its defaults

    Potrace and VTracer ran with their documented default settings. Potrace reads one color, so color images were split into eight color layers and traced once per layer, as Inkscape's multiple-scan mode does. The line drawing was traced in black and white: Potrace at threshold 128, VTracer with its black-and-white preset. PerfectVector received no settings.

  4. 04

    Count what is in the file

    Anchor points are counted as Illustrator and Figma show them: one per segment end, without handles. A circle or ellipse counts as 4, a rectangle as 4, a rounded rectangle as 8. File size is the SVG as saved.

  5. 05

    Compare with the clean artwork

    Each SVG was rendered with resvg at the input size and compared with the artwork before compression. Pixel match is the share of pixels within 32 of 255 levels in every channel.

  6. 06

    Publish the files

    The inputs, all 24 SVGs and every figure on this page are downloadable, so you can check the counts or run your own.

Versions and settings

ToolVersionHow it ranSettings
Potrace1.16potrace command line (Homebrew bottle)--turdsize 2 --alphamax 1 --opttolerance 0.2 (documented defaults); color images quantized to 8 colors (Pillow FASTOCTREE, no dithering) and traced once per color, stacked, as Inkscape's Trace Bitmap multiple-scan color mode does; black-and-white sample traced once at threshold 128
VTracer1.0.0-alpha.4official Python binding (PyPI vtracer 1.0.0a4), vtracer.Config()library defaults: color clustering, hierarchical stacked, spline mode, filter_speckle 4, color_precision 6, layer_difference 16, corner_threshold 60, length_threshold 4, max_iterations 10, splice_threshold 45, path_precision 2; Config.bw() for the black-and-white sample
PerfectVectorproduction engine, 2026-11-17Developer API POST https://api.perfectvector.com/v1/vectorizationsdefaults; no parameters sent

Check the files yourself

Every input JPEG and SVG on this page opens from its card above. The figures file lists every count, file size, SHA-256 hash, version and setting used here. The settings files list every setting we tried and its results, and the clean originals are the artwork that pixel match is scored against.

What this test does not show

  • Eight images are a small set, and we chose and generated them. Your images may behave differently.
  • Every tool ran at its defaults. Tuning Potrace's color count or VTracer's speckle and color settings can change their results, in either direction.
  • Inputs were deliberately compressed. On a clean, lossless PNG the free tracers have less noise to follow.
  • Anchor points, file size and pixel match do not measure everything a designer cares about, such as how editable the layers are.
  • VTracer 1.0.0-alpha.4 is the newest release but still an alpha. The latest stable release, 0.6.15, wrote almost the same number of anchor points on our images (117,388 in total) in files 86% larger.
Before you pick a plan

You're in good company.

I'd tried everything and been let down every time — I'd given up, figuring today's tech just couldn't do this. And you actually built it. If this is real, it's genuinely incredible.
sam••••via Threads
It converts at even better quality than I expected — it preserves the character of the original better than anything else I've tried.
imbee••••via Threads
PerfectVector is impressively fast, and the output quality is already very good. With a bit more refinement it could easily compete with the leading tools.
InPixelSt••••design studiovia email
Way more detailed than I expected. Opening Illustrator to convert every single time was such a chore — bookmarked.
bazzing••••Illustrator uservia Threads
Tried it — it's accurate. Simple images actually expose detail differences more than complex ones do, and this nails them.
good9••••via Threads

SIMPLE, FAIR PRICING

Start free. Upgrade when you need more.

Vectorizing and preview are always free and unlimited — you only spend a credit when you download a finished file.

50% off your first month of Pro or Max.For an account's first subscription. Then the regular monthly price; cancel anytime.

Free

Try it out, casual use

$0
CreditsNever expires
One-time1
  • Unlimited vectorizing & preview
  • Simplify & merge colors
  • Clean, optimized SVG output
  • SVG, PNG, JPG, PDF, EPS, DXF export
  • Re-download saved files for free
  • Studio · up to 50 files per batch

Pro

For regular design work

Regular price $8. $4 for the first month, 50% off.

then $8 per month · Cancel anytime

Credits a month
Pro20

Per download, first month$0.20

  • Everything in Free, plus:
  • Credits refresh monthly
  • Priority processing
  • Priority support
  • Early access to new features
  • Studio · up to 50 files per batch
Popular

Max

For professional creators and studios

Regular price $20. $10 for the first month, 50% off.

then $20 per month · Cancel anytime

Credits a month

Per download, first month$0.10

  • Everything in Pro, plus:
  • Pick the size you need, from 1x to 16x
  • Highest monthly volume
  • Studio · up to 50 files per batch

Or pay as you go

Buy credits only when you need them. They never expire, and nothing renews.

Per download$0.50

Secure payments, powered by Stripe

Payments via Lemon Squeezy, a Stripe company.

Lemon Squeezy
FREQUENTLY ASKED QUESTIONS

Questions before you convert?

Is VTracer better than Potrace?

For color images, often. On our eight JPEGs VTracer wrote fewer anchor points than Potrace on six and smaller files on five, and it reads color directly, where Potrace needs one pass per color. Neither one consistently matched the clean artwork better. Potrace was better on black-and-white line art, where it wrote the fewest points and the smallest file of all three tools.

Does Inkscape's Trace Bitmap use Potrace?

Yes. Inkscape's Trace Bitmap is built on Potrace. In its multiple-scan color mode it reduces the image to a set number of colors, traces each one separately and stacks the results, which is how we ran Potrace on the color images here.

Can Potrace trace color images?

Not directly. Potrace converts a black-and-white bitmap into outlines. To get color, a tool has to split the image into color layers first and run Potrace on each one, so the result depends on how those colors are chosen. On some of our images the eight chosen colors lost a whole shape's color, such as the lighthouse's red lantern, which came out white.

Why does a traced SVG have so many anchor points?

A tracer follows the edge of every region pixel by pixel, and each step along a ragged edge can become a new point. JPEG compression adds rings of noise around edges, so a traced JPEG gets even more points. In our test the free tracers wrote between 2,198 and 60,064 points per image.

Why does VTracer create so many colors from a JPEG?

VTracer groups pixels by color, and JPEG compression shifts the colors slightly around every edge. Each slightly different group can become its own filled path. On our color images VTracer wrote between 164 and 3,320 distinct fill colors.

Which tracer makes the smallest SVG?

PerfectVector made the smallest file on seven of the eight images, 258 KB for all eight against 3.37 MB for Potrace and 3.03 MB for VTracer. Potrace made the smallest file for the black-and-white line drawing.

Does PerfectVector use Potrace or VTracer?

No. PerfectVector uses its own engine. Instead of following the pixel edge, it estimates the shapes the artwork was drawn with and writes curves, circles and rectangles into the SVG.

Can I use PerfectVector from code or an AI assistant?

Yes. The Developer API converts an image to an SVG in one call: it returns the file, or a status link to check if the conversion takes longer. The PerfectVector MCP server lets Claude, ChatGPT, Claude Code and Codex convert images for you when you ask in plain words. Both use the same engine; the PerfectVector results in this benchmark came from the Developer API.

Is PerfectVector free like Potrace and VTracer?

Vectorizing and preview are always free and unlimited — you only spend a credit when you download a finished file.

Can I reproduce this benchmark?

You can check it. Every input JPEG and output SVG opens from this page, and figures.json lists the versions, settings, file hashes and counts. The clean originals that pixel match is scored against, and the results of every setting we tried, including VTracer's presets and its stable 0.6.15 release, can be downloaded from the method section, so you can recount any figure or rerun the same versions on the same JPEGs.

Drop your own image. Count the points.

Vectorizing and preview are always free and unlimited — you only spend a credit when you download a finished file.

Unlimited vectorizing & preview